LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Vibe Standard >> Repair and Diagnosis >> Brakes >> Anti-Lock Brake System, Traction Control System & Stability Control System >> Repair Instructions >> Rear Wheel Speed Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Wheel Cylinder Components
    GM829894Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: The wheel speed sensor is serviceable only as an assembly. Do NOT attempt to service the sensor harness pigtail.
  1. Disconnect the electrical connector (6) from the wheel speed sensor.
  2. Remove the rear axle hub and bearing assembly. Refer to Rear Wheel Bearing and Hub Replacement .
    3. Fig 2: Removing Wheel Speed Sensor From Axle Hub
    GM840299Courtesy of GENERAL MOTORS CORP.
  3. Remove the wheel speed sensor from the rear axle hub.
scientia non olet · About LEMON Manuals