LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Vibe Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 287 (Accessory Power Socket) >> Repair Instructions >> Accessory AC and DC Power Control Module Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the communication interface module. Refer to Communication Interface Module Replacement .
    2. Fig 1: Removing/Installing Bolts And Voltage Inverter Assembly
    GM2033182Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the clamp and connector.
  3. Remove the 3 bolts and the voltage inverter assembly.
scientia non olet · About LEMON Manuals