LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Vibe Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 287 (Accessory Power Socket) >> Repair Instructions >> Accessory AC and DC Power Control Module Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Bolts And Voltage Inverter Assembly
    GM2033182Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Caution .
  1. Install the voltage inverter assembly with the 3 bolts.

    Tighten:  Tighten the bolts to 19 N.m (14 lb ft).

    2. Fig 2: Communication Interface Module
    GM2033184Courtesy of GENERAL MOTORS CORP.
  2. Install the communication interface module. Refer to Communication Interface Module Replacement .
scientia non olet · About LEMON Manuals