LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Vibe Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 263 (Front Suspension System) >> Repair Instructions >> Lower Control Arm Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lower the front suspension crossmember as far as necessary to remove the control arm fasteners. Refer to Front Suspension Crossmember Replacement (All Wheel Drive) or Front Suspension Crossmember Replacement (Two Wheel Drive) .
    2. Fig 1: Left Lower Control Arm, Bolts And Nuts (FWD)
    GM821351Courtesy of GENERAL MOTORS CORP.
  2. Remove the 2 bolts (1, 4) and the 1 nut (3) in order to remove the control arm from the crossmember.
scientia non olet · About LEMON Manuals