Removal Procedure

WARNING: This page is about a different car, the 2009 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Front Wheel Speed Sensor

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: The wheel speed sensor is serviceable only as an assembly. Do NOT attempt to service the sensor harness pigtail.

Remove the wheelhousing. Refer to Wheelhouse Panel Replacement .
Disconnect the wheel speed sensor electrical connector (1).

Fig 2: Identifying Wheel Speed Sensor Pigtail Harness Bolt

Courtesy of GENERAL MOTORS CORP.

Remove the bolt (1) retaining the wheel speed sensor pigtail harness.

Fig 3: Exploded View Of Separate Brake Hose Bolt

Courtesy of GENERAL MOTORS CORP.

Remove the bolt (1) and separate the brake hose.

Fig 4: Identifying Front Wheel Speed Sensor Bolt And Sensor Clamp & Strut

Courtesy of GENERAL MOTORS CORP.

Remove the bolt (1) and the sensor clamp from the strut.

Fig 5: Exploded View Of Sensor Harness Clamp

Courtesy of GENERAL MOTORS CORP.

Remove the sensor harness clamp.

Fig 6: Exploded View Of Wheel Speed Sensor Retaining Bolt & Wheel Speed Sensor

Courtesy of GENERAL MOTORS CORP.

Remove the wheel speed sensor retaining bolt (1) and remove the wheel speed sensor (2) from the steering knuckle.