Installation Procedure

WARNING: This page is about a different car, the 2009 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Roof Rail Module Hooks

Courtesy of GENERAL MOTORS CORP.

Install the roof rail module.
Engage the 5 roof rail module hooks (1).

Fig 2: Identifying Roof Rail Module Bolts

Courtesy of GENERAL MOTORS CORP.

Install 4 new clips (2) to retain roof rail module to body panel.

Fig 3: Identifying Roof Rail Module Pins

Courtesy of GENERAL MOTORS CORP.

Install 4 new pins (1).

Fig 4: Identifying Roof Rail Module Bolts

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to FASTENER CAUTION .

Install the roof rail module bolts (1).

Tighten: Tighten the roof rail module mounting bolts to 9.8 N.m (87 lb in).

Fig 5: Identifying Roof Rail Module Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Install the roof rail module electrical connector.
Install the headliner. Refer to Headlining Trim Panel Replacement .
Enable the SIR system. Refer to SIR Disabling and Enabling .