LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Vibe Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 240 (Supplemental Inflatable Restraint System) >> Repair Instructions >> Inflatable Restraint Front End Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Front End Sensor Components
    GM1462772Courtesy of GENERAL MOTORS CORP.
  1. Install the front end sensor.
    2. NOTE: Refer to FASTENER CAUTION .
  2. Install the front end sensor - fastener (2).

    Tighten:  Tighten the fasteners to 9 N.m (80 lb in).

  3. Install the front end sensor electrical connector (1).
  4. Install the front fascia. Refer to Front Bumper Fascia Replacement (Without GT) or Front Bumper Fascia Replacement (With GT) .
  5. Enable the SIR system. Refer to SIR Disabling and Enabling .
scientia non olet · About LEMON Manuals