LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Vibe Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 130 (Power Seats) >> Diagnostic Information and Procedures >> Memory Seat Feature Inoperative >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different car, the 2008 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, verify the scan tool Memory Recall Switches parameter is approximately 2.74 volts while pressing the memory 1 switch.
    • If the parameter is not the specified value, perform the Memory Switch component test. If the switch tests normal, replace the driver door switch.
  2. Verify the scan tool Memory Recall Switches parameter is approximately 1.78 volts while pressing the memory 2 switch.
    • If the parameter is not the specified value, replace the memory switch.
  3. Verify the scan tool Memory Recall Switches parameter is approximately 0.96 volts while pressing the EXIT switch.
    • If the parameter is not the specified value, replace the memory switch.
  4. If all circuits test normal, replace the memory seat module.
scientia non olet · About LEMON Manuals