LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Vibe Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 102 (Front Drive Axle) >> Repair Instructions >> Front Axle Lubricant Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Refer to Fastener Notice .
    Fig 1: Front Drive Axle Fill & Drain Plug
    GM865996Courtesy of GENERAL MOTORS CORP.
  1. Install the drain plug (2).

    Tighten:  Tighten the drain plug to 33 N.m (24 lb ft).

  2. Fill the front differential with lubricant. Use the proper fluid. Refer to Approximate Fluid Capacities and Fluid and Lubricant Recommendations .
  3. Install the fill plug (1).

    Tighten:  Tighten the fill plug to 33 N.m (24 lb ft).

  4. Install the front differential carrier shield, if equipped. Refer to Engine Protection Shield Replacement .
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals