LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Vibe Automatic >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Door Lock System And Release Systems >> Repair Instructions >> Liftgate Outside Handle Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Liftgate Handle Components
    GM824937Courtesy of GENERAL MOTORS CORP.
  1. Install the liftgate handle (2) to the liftgate applique studs (3).
    2. NOTE: Refer to Fastener Notice .
  2. Install the 2 nuts (1)to the liftgate handle (2).

    Tighten:  Tighten the liftgate handle nuts to 4.0 N.m (35 lb in).

  3. Connect the cable to liftgate handle.
  4. Install liftgate trim panel. Refer to Liftgate Trim Panel Replacement .
  5. Close the liftgate.
scientia non olet · About LEMON Manuals