Installation Procedure

Fig 1: Identifying Catalytic Converter Heat Shield

Courtesy of GENERAL MOTORS CORP.

Position the catalytic converter heat shield, and insert the catalytic converter heat shield between the underbody and the dash panel heat shield.
Install the NEW rivets.

Fig 2: View Of Fuel Tank Heat Shield & Fuel Tank Assembly

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Install the fuel tank strap bolt.
Tighten: Tighten the bolt to 25 N.m (18 lb ft).

Fig 3: View Of Propeller Shaft Underbody Guard Loop & Bolts

Courtesy of GENERAL MOTORS CORP.

If the vehicle is equipped with AWD, install the propeller shaft underbody guard loop and bolts.
Tighten: Tighten the bolts to 25 N.m (18 lb ft).
Install the muffler assembly. Refer to Muffler Replacement (LNJ) or Muffler Replacement (LY7) .