Installation Procedure
WARNING: This page is about a different car, the 2009 Pontiac Torrent and 2009 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
- Position the battery tray to the vehicle.
- Connect the battery cooling air inlet duct to the battery tray.
- Set the battery tray completely in place.
- Install the battery tray bolts and tighten to 15 N.m (11 lb ft).
- Install the A/C evaporator outlet line clamp to the battery tray stud.
- Install the A/C evaporator line clamp nut at the battery tray and tighten to 15 N.m (11 lb ft).
- Install the battery. Refer to Battery Replacement .
NOTE:
Fully insert the duct into the hole on the battery tray past the second molded in ridge, stopping at the flange.
CAUTION:
Refer to Fastener Caution
.