LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Torrent Base, AWD >> Repair and Diagnosis (Single Page) >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Diagnostic Information and Procedures >> DTC P0562 >> Circuit/System Verification

Circuit/System Verification

  1. Measure and record the voltage at the battery terminals with the engine OFF, and again with the engine running. Verify that the battery voltage is 11-16 volts with the engine OFF and with the engine running.
  2. Observe the scan tool Ignition 1 Signal parameter in the ECM data list. Verify that the scan tool displays a value that is within 2 volts of the battery voltage recorded in step 1.
  3. Refer to Diagnostic Aids .
scientia non olet · About LEMON Manuals