Radio Scan Tool Information (Base Radio)
WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
Radio Scan Tool Data Parameters
| Parameter | System State | Expected Value | Description |
|---|---|---|---|
| Operating Conditions: Ignition ON | |||
| Antenna Module | - | Enabled | The scan tool displays Enabled or Disabled. This is the state of the antenna module. |
| Battery Voltage Signal | - | Varies | This displays Volts. This is the current battery voltage signal. |
| Theft Armed | - | Learned VIN | The scan tool displays Learned VIN or No VIN. Learned VIN is displayed if the radio has the VIN stored in memory. |
| Theft Lock Status | - | Inactive | The scan tool displays Active or Inactive. This is the status of the theft lock. |
Radio Scan Tool Output Controls
| Output Control | Description |
|---|---|
| Antenna | This output control is used to command the antenna. |
| Left Front Speaker | Commanding the speaker ON will turn OFF all speakers except this speaker. Commanding the speaker OFF will turn OFF all speakers. |
| Left Rear Speaker | Commanding the speaker ON will turn OFF all speakers except this speaker. Commanding the speaker OFF will turn OFF all speakers. |
| Radio Setup | This output control is used to setup the radio. |
| Right Front Speaker | Commanding the speaker ON will turn OFF all speakers except this speaker. Commanding the speaker OFF will turn OFF all speakers. |
| Right Rear Speaker | Commanding the speaker ON will turn OFF all speakers except this speaker. Commanding the speaker OFF will turn OFF all speakers. |