Instrument Cluster Scan Tool Information
WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
Instrument Panel Cluster Scan Tool Data Parameters
| Parameter | System State | Expected Value | Description |
|---|---|---|---|
| Operating Conditions: Ignition ON | |||
| Battery Voltage Signal | - | Varies | This displays Volts. This is the current battery voltage signal. |
| DIC Information Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the driver information center (DIC) information switch. |
| DIC Switch Input | - | Varies | This displays Volts. This is the current driver information center (DIC) switch input voltage. |
| Ignition 1 Input | - | Active | The scan tool displays Active or Inactive. This is the state of the ignition 1 input. |
| Menu Switch | - | Off | The scan tool displays On or Off. This is the state of the menu switch. |
| Reset Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the reset switch. |
Instrument Panel Cluster Scan Tool Output Controls
| Output Control | Description |
|---|---|
| DIC All Segments Test | This output control is used to command the driver information center (DIC) segments ON and OFF. |
| Dimming | This output control is used to command the dimming to INCREASE or DECREASE by 20% increments. |
| Display(s) Test | This output control is used to command the gauges to sweep from minimum to maximum. |
| Display Test | This output control is used to command the instrument panel indicators to turn ON and OFF. |