LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Solstice Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 110 (Anti-Lock Brake System, Traction Control System & Stability Control System) >> Diagnostic Information & Procedures >> DTC C0710 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2008 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the steering wheel to the straight ahead centered, position.
  2. Ignition ON, observe the SWPS Signal A and SWPS Signal B in EBCM scan tool data display. One of the signals should be approximately 2.5 volts and the other circuit should be approximately 0 volts.
  3. As the steering wheel is turned, each signal should travel smoothly between 0 and 5 volts.
scientia non olet · About LEMON Manuals