LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Solstice Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 2.4L - Introduction (2 Of 2) >> Repair Instructions >> Knock Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Locating KS Electrical Connector
    GM1590505Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the knock sensor (KS) electrical connector (3).
  2. Remove the KS electrical connector clip from the oil level indicator tube bracket.
    3. Fig 2: Identifying Knock Sensor & Bolt
    GM1578476Courtesy of GENERAL MOTORS CORP.
  3. Remove the KS bolt.
  4. Remove the KS.
scientia non olet · About LEMON Manuals