LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Solstice Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 2.4L - Introduction (2 Of 2) >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement >> Removal Procedure

Removal Procedure

NOTE: Cap the fittings and plug the holes when servicing the fuel system in order to prevent dirt and other contaminants from entering the open pipes and passages.
    Fig 1: View Of Fuel Sending Unit Access Cover & Bolts
    GM1594369Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear compartment trim panel. Refer to Rear Compartment Trim Panel Replacement .
  2. Remove the fuel pump module access cover bolts.
  3. Remove the access cover.
    4. Fig 2: Locating Fuel Tank Electrical Connectors
    GM1594359Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the fuel tank pressure sensor electrical connector (5).
    5. Fig 3: Locating Fuel Tank Pressure Sensor
    GM1594372Courtesy of GENERAL MOTORS CORP.
  5. Remove the fuel tank pressure sensor (2).
scientia non olet · About LEMON Manuals