Driver Seat and Passenger Seat Heater Control Module Scan Tool Information
WARNING: This page is about a different car, the 2008 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Climate Control Seat Module
| Parameter | System State | Expected Value | Description |
|---|---|---|---|
| Operating Conditions: Ignition ON | |||
| Battery Voltage | - | Varies | The scan tool displays volts. This is the current battery voltage. |
| Seat 1 Back Temp | - | Varies | The scan tool counts from 0-255. This represents the signal from the thermistor and converts the volts to counts. |
| Seat 1 Back Cushion Temp | - | Varies | The scan tool counts from 0-255. This represents the signal from the thermistor and converts the volts to counts. |
| Seat 2 Back Temp | - | Varies | The scan tool counts from 0-255. This represents the signal from the thermistor and converts the volts to counts. |
| Seat 2 Cushion Temp | - | Varies | The scan tool counts from 0-255. This represents the signal from the thermistor and converts the volts to counts. |
Climate Control Seat Module Scan Tool Output Controls
| Output Control | Description |
|---|---|
| Driver Seat Blower Cmd. | This output control is used to command the driver seat blower on and off. |
| Driver Seat Cool Cmd. | This output control is used to command the driver seat cool on and off. |
| Driver Seat Heat Cmd. | This output control is used to command the driver seat heat on and off. |
| Passenger Seat Blower Cmd. | This output control is used to command the passenger seat blower on and off |
| Passenger Seat Cool Cmd. | This scan tool output is used to command the passenger seat cool on and off |
| Passenger Seat Heat Cmd. | This output control is used to command the passenger seat heat on and off |