Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Rear Generator Bolt & Ground Cable

Courtesy of GENERAL MOTORS CORP.

Position the engine ground cable to the generator.

NOTE: Refer to Fastener Notice .

Install the rear generator bolt.
Tighten: Tighten the bolt to 50 N.m (37 lb ft).

Fig 2: Identifying Engine Ground Cable

Courtesy of GENERAL MOTORS CORP.

Install the bolt (1) securing the engine ground cable (2) to the right side body frame rail.
Tighten: Tighten the bolt to 25 N.m (18 lb ft).
Install the front compartment sight shield. Refer to Front Compartment Sight Shields Replacement .