LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Grand Prix Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 362 (Disc Brake System) >> Repair Instructions >> Front Disc Brake Hardware Replacement >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2008 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Disc Brake Pad Hardware
    GM815525Courtesy of GENERAL MOTORS CORP.
  1. Clean the 2 brake pad retainers (4, 9). Inspect the retainers for the following conditions:
    • Sufficient rebound
    • No deformation
    • No cracks
    • No wear
    • No rust
    • No dirt

      If the retainers meet the above conditions, re-use the retainers.

  2. Inspect the caliper bracket for corrosion and wear. Replace the bracket if the bracket is damaged. Refer to Front Brake Caliper Bracket Replacement .
  3. Inspect the caliper housing for corrosion and wear. Replace the caliper if the caliper housing is damaged. Refer to Front Brake Caliper Replacement .
scientia non olet · About LEMON Manuals