Installation Procedure
WARNING: This page is about a different car, the 2008 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
- Install the power mirror switch (1) to the power mirror switch/dimmer switch plate (3).
- Install the lamp dimmer switch/remote control rearview mirror switch trim plate (3). Ensure that the retaining tabs are fully engaged.
- Connect the power mirror switch electrical connector.
- Connect the dimmer/switch electrical connector (2).
- Install the left I/P accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement - Left Side .