LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Grand Prix Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 331 (Lighting Systems) >> Repair Instructions >> Stop Lamp Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Stop Lamp Switch Component View
    GM819282Courtesy of GENERAL MOTORS CORP.
  1. Install the stop lamp switch (1) to the brake pedal bracket (3). Secure the stop lamp switch (1) using one locknut (2). Do not tighten.
  2. Adjust the stop lamp clearance. Refer to Stop Lamp Switch Adjustment .
    3. NOTE: Refer to Battery Disconnect Caution .
  3. Tighten the locknut (2) for the stop lamp switch (1).

    Tighten:  Tighten the locknut to 10 N.m (89 lb in).

  4. Connect the stop lamp switch electrical connector.
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals