Installation Procedure

WARNING: This page is about a different car, the 2008 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Fog Lamp Bulb

Courtesy of GENERAL MOTORS CORP.

Install the fog lamp bulb to the fog lamp, turning clockwise, if required.

Fig 2: Fog Lamp And Front Bumper Fascia

Courtesy of GENERAL MOTORS CORP.

Install the fog lamp (1) to the front bumper fascia (2).

Fig 3: Lower Splash Shield, Push Retainer And Screws

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connector to the fog lamp.
Install the two screws (1) and the push retainer (3) to the front lower splash shield (2).
Lower the vehicle.
Check and adjust the fog lamp aim as necessary. Refer to Fog Lamp Aiming .