Installation Procedure
WARNING: This page is about a different car, the 2008 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
- Install the roof rail module (1).
- Install the roof rail module bolts (4) in sequence shown.
Tighten: Tighten the roof rail module mounting bolts to 9.8 N.m (7 lb ft).
- Install the 6 roof rail module screws (3).
- Install the roof rail module clip (2).
- Install the roof rail module electrical connector.
- Install the headliner. Refer to Headlining Trim Panel Replacement .
- Enable the SIR system. Refer to SIR Disabling and Enabling .
NOTE:
Refer to FASTENER NOTICE
.