LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Grand Prix Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 325 (Supplemental Inflatable Restraint System) >> Repair Instructions >> Inflatable Restraint Steering Wheel Module Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Steering Wheel Module, Connector Position Assurances And Connectors
    GM820026Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to SIR Inflator Module Handling and Storage Caution .
  1. Connect the inflator module electrical connectors (2).
  2. Connect the connector position assurances (3) to the inflator module.
  3. Install the steering wheel module (1).
    4. Fig 2: Identifying Upper Steering Column Components
    GM820027Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE .
  4. Install the bolts to the steering wheel module (1).

    Tighten:  Tighten the bolts to 8.8 N.m (78 lb in).

  5. Enable the SIR system. Refer to SIR Disabling and Enabling .
scientia non olet · About LEMON Manuals