Installation Procedure
WARNING: This page is about a different car, the 2008 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
- Install the side impact module (2).
- Install the side impact module fasteners (1).
- Connect the electrical connector (3) to the side impact module.
- Install the front seat back cover. Refer to Front Seat Back Cushion Cover and Cushion Pad Replacement (Passenger Side) or Front Seat Back Cushion Cover and Cushion Pad Replacement (Driver Side) .
- Enable the SIR system. Refer to SIR Disabling and Enabling .