LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Grand Prix Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 325 (Supplemental Inflatable Restraint System) >> Repair Instructions >> Inflatable Restraint Passenger Presence System Replacement - Front (Module) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying PPS Module
    GM1463084Courtesy of GENERAL MOTORS CORP.
  1. Install the PPS module (1).
  2. Connect the electrical connector to the PPS module (1).
  3. Enable the SIR system. Refer to SIR Disabling and Enabling .
  4. Perform PPS Rezeroing procedure. Refer to Passenger Presence System Rezeroing .
scientia non olet · About LEMON Manuals