LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Grand Prix Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 262 (Vehicle Access) >> Repair Instructions >> Midgate Latch Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Midgate Inner Panel
    GM1427709Courtesy of GENERAL MOTORS CORP.
  1. Install the latch release switch to the hole in the midgate inner panel.
  2. Press the latch release switch (2) in until all the retaining tabs are fully seated.
  3. Connect the electrical connector (3) to the latch release switch.
    4. Fig 2: Midgate Inner Panel
    GM1412513Courtesy of GENERAL MOTORS CORP.
  4. Install the midgate inner panel. Refer to Midgate Inner Panel Replacement .
scientia non olet · About LEMON Manuals