Installation Procedure

WARNING: This page is about a different car, the 2007 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Headlamp Dimmer Switch Screws

Courtesy of GENERAL MOTORS CORP.

Align the dimmer switch to the I/P cluster trim plate.

Fig 2: Dimmer Switch Screws (I/P)

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Install the dimmer switch screws.
Tighten: Tighten the screws to 2 N.m (18 lb in).

Fig 3: View Of I/P Accessory Trim Plate

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connector to the dimmer switch.
Align the locating pins and the retainers on the I/P cluster trim plate to the openings in the I/P.
Push in the trim plate at each of the retainer locations. Completely engage the retainers.
Return the steering wheel to the original position.
Install the steering column filler. Refer to Steering Column Opening Filler Replacement .
Install the I/P accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement .