LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Grand Prix Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 166 (Supplemental Inflatable Restraint System) >> Repair Instructions >> Inflatable Restraint Front End Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Do not strike or jolt the inflatable restraint front end sensor. Before applying power to the front end sensor make sure that it is securely fastened. Failure to observe the correct installation procedure could cause SIR deployment, personal injury, or unnecessary SIR system repairs.
    CAUTION: Refer to SIR Caution .
  1. Disable the SIR system. Refer to SIR Disabling and Enabling .
  2. Remove the radiator upper air baffle and deflector. Refer to Radiator Air Upper Baffle and Deflector Replacement .
    3. Fig 1: Inflatable Restraint Front End Sensor Bolts
    GM809051Courtesy of GENERAL MOTORS CORP.
  3. Remove the sensor bolts (1).
  4. Remove the sensor (2) from the upper radiator core support (3).
    5. Fig 2: View Of Sensor, CPA & Yellow Sensor Harness Connector
    GM809058Courtesy of GENERAL MOTORS CORP.
  5. Remove the orange connector position assurance (CPA) (2) from the yellow sensor harness connector (3).
  6. Disconnect the harness connector from the sensor (1).
  7. Remove the sensor from the vehicle.
scientia non olet · About LEMON Manuals