LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Grand Prix Base >> Repair and Diagnosis >> Body & Frame >> Frames, Subframes & Crossmembers >> Frame And Underbody >> Repair Instructions >> Front Fender Liner Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Front Fender Liner
    GM1229766Courtesy of GENERAL MOTORS CORP.
  1. Position the front fender liner to the front fender.
    2. NOTE: Refer to Fastener Notice .
  2. Install the front fender liner screws to the wheel opening.

    Tighten:  Tighten the front fender liner screws to 7 N.m (61 lb in).

  3. Install the front fender liner screws to the lower rear of the fender.

    Tighten:  Tighten the screws to 7 N.m (61 lb in).

  4. Install the front fender liner screws to the lower engine compartment side rail.

    Tighten:  Tighten the screws to 7 N.m (61 lb in).

  5. Install the front fender liner screws at the front bumper fascia.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

  6. Lower the vehicle.
scientia non olet · About LEMON Manuals