LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Grand Prix Base >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Power Door Lock System And Release Systems >> Repair Instructions >> Handle Lock Rod Guide Block Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Retaining Guide Block & Handle Lock Rod
    GM794020Courtesy of GENERAL MOTORS CORP.
  1. Install the lock rod guide block (1) to the door.
  2. Install the inside handle rod to the lock rod guide block (1) by pushing inward to secure the rod into the lock rod guide block.
  3. Inspect the door for proper operation.
  4. Install the front or rear door trim panel. Refer to Front Side Door Trim Panel Replacement or Rear Side Door Trim Panel Replacement .
scientia non olet · About LEMON Manuals