Component Testing
WARNING: This page is about a different car, the 2009 Saturn Outlook, 2009 GMC Acadia, 2009 Chevrolet Traverse, and 2009 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the harness connector at the seat belt switch.
- With the seat belt buckled, test for infinite resistance between the signal circuit terminal 1 and the low reference terminal 2.
- If not the specified range, replace the seat belt switch.
- With the seat belt unbuckled, test for less than 2 ohms between the signal circuit terminal 1 and the low reference terminal 2.
- If greater than the specified range, replace the seat belt switch.