LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> G8 Base >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust System >> Repair Instructions >> Fuel Tank Heat Shield Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Fuel Tank Heat Shield To Fuel Tank Retaining Nuts
    GM1947049Courtesy of GENERAL MOTORS CORP.
  1. Position the fuel tank heat shield (2) to the vehicle.
    2. NOTE: Refer to Fastener Notice .
  2. Install the fuel tank heat shield to fuel tank retaining nuts (1).

    Tighten:  Tighten the nuts to 4 N.m (35 lb in).

  3. Lower the vehicle to the ground.
scientia non olet · About LEMON Manuals