Installation Procedure
- Install the negative battery cable to chassis retain bolt (1).
Tighten: Tighten the nut to 15 N.m (11 lb ft).
- Install the negative battery cable to the battery terminal.
- Install the negative battery cable nut (1) to negative battery terminal.
Tighten: Tighten the battery terminal retaining nut to 17 N.m (13 lb ft).
- Install the left-hand cargo area carpet side. Refer to Rear Compartment Side Trim Panel Replacement
- Install the cargo area center carpet. Refer to Rear Compartment Floor Panel Carpet Replacement
NOTE:
Refer to Fastener Notice
.
CAUTION:
Refer to Battery Disconnect Caution
.
IMPORTANT:
Clean any existing corrosion from the battery terminal and the battery cable end.