Connect Procedure
- Connect the battery negative cable to the battery.
- Install the battery negative cable to battery terminal retaining nut (1), Tighten the battery negative cable nut.
Tighten: Tighten the nut to 17 N.m (13 lb ft).
- Install the left-hand cargo area carpet side access panel (1) in the left-hand cargo area carpet side (2).
- Close the rear compartment lid.
CAUTION:
Refer to Battery Disconnect Caution
.
IMPORTANT:
Clean any existing corrosion from the battery terminal and the battery negative cable end.
NOTE:
Refer to Fastener Notice
.