Installation Procedure
WARNING: This page is about a different car, the 2010 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
- Install the sunroof window. Refer to Sunroof Window Replacement - Front . Tighten the screws to 4 N.m (35 lb in).
- Install the motor/actuator. Refer to Sunroof Motor/Actuator Replacement . Tighten the motor attachment screws to 3.5 N.m (31 lb in).
- Connect the electrical connector to the motor/actuator.
- Remove the pin (1) from the holes that held the position while installing the drive motor.
- Install the headliner. Refer to Headlining Trim Panel Replacement (Wagon) or Headlining Trim Panel Replacement (Sedan) .
- Perform the Initialization/Teach Procedure. Refer to Sunroof Motor/Actuator Initialization/Teach Process .
- Verify the operation of the sunroof.
CAUTION:
Refer to Fastener Caution
.