LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> G6 Base, 2.4 B >> Repair and Diagnosis >> External Pages >> Different car >> Section 1630 (Disc Brake System) >> Repair Instructions >> Rear Brake Backing Plate Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2012 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Wheel Bearing/Hub Assembly Nuts
    GM1276112Courtesy of GENERAL MOTORS COMPANY
  1. Remove the wheel bearing/hub. Refer to Rear Wheel Bearing and Hub Replacement .
    2. IMPORTANT:

    The shield is attached to the wheel knuckle through the wheel bearing hub bolts.

  2. Remove the shield from the wheel knuckle.
scientia non olet · About LEMON Manuals