LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> G6 Base, 2.4 B >> Repair and Diagnosis >> External Pages >> Different car >> Section 1437 (Power Steering System) >> Diagnostic Information and Procedures >> DTC C0897 >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different car, the 2010 Pontiac G6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the X2 harness connector at the PSCM.
  2. Ignition ON, verify that a test lamp illuminates between the ignition circuit terminal 8 and ground.
    • If the test lamp does not illuminate, test the ignition circuit for a short to ground or an open/high resistance.
  3. If all circuits test normal, replace the PSCM.
scientia non olet · About LEMON Manuals