LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> G6 Base, 2.4 B >> Repair and Diagnosis >> External Pages >> Different car >> Section 1433 (Engine Control System & Fuel System - 3.9L - Repair Instructions) >> Repair Instructions >> Crankshaft Position Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 Pontiac G6. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: CKP Sensor
    GM1587763Courtesy of GENERAL MOTORS CORP.
  1. Lubricate the CKP sensor O-ring with clean engine oil.
  2. Install the CKP sensor.
    CAUTION: Refer to Fastener Caution .
  3. Install the CKP sensor stud.

    Tighten:  Tighten the stud to 10 N.m (89 lb in).

    4. Fig 2: KS & CKP Sensor Electrical Connectors
    GM1583637Courtesy of GENERAL MOTORS CORP.
  4. Connect the CKP sensor electrical connector (2).
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals