LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> G6 Base, 2.4 B >> Repair and Diagnosis >> External Pages >> Different car >> Section 1431 (Engine Control System & Fuel System - 2.4L - Repair Instructions) >> Repair Instructions >> Manifold Absolute Pressure Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 Pontiac G6. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: MAP Sensor
    GM1581050Courtesy of GENERAL MOTORS CORP.
  1. Install the MAP sensor with the port seal into the intake manifold.
  2. Connect the MAP sensor electrical connector.
  3. Install the throttle body. Refer to Throttle Body Assembly Replacement .
scientia non olet · About LEMON Manuals