LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> G6 Base, 2.4 B >> Repair and Diagnosis >> External Pages >> Different car >> Section 1431 (Engine Control System & Fuel System - 2.4L - Repair Instructions) >> Repair Instructions >> Knock Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Pontiac G6. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Engine Oil Pressure Sensor, Knock Sensor & CKP Sensor Electrical Connectors
    GM1571236Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the knock sensor (KS) electrical connector (1).
  2. Remove the KS electrical connector clip from the oil level indicator tube bracket.
  3. Remove the oil level indicator tube. Refer to Oil Level Indicator Tube Replacement (LE5) .
    4. Fig 2: Knock Sensor & Bolt
    GM1578476Courtesy of GENERAL MOTORS CORP.
  4. Remove the KS bolt.
  5. Remove the KS.
scientia non olet · About LEMON Manuals