Rear Toe Adjustment
WARNING: This page is about a different car, the 2010 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
- Loosen the rear suspension adjustment link nuts (1).
- Rotate the rear suspension adjustment link until the proper specification is achieved (2).
- Hold the rear suspension adjustment link (2) and tighten the nuts (1) to 75 N.m (55 lb ft).
- Recheck the toe setting after tightening.
- Readjust the toe setting if necessary. Refer to Wheel Alignment Specifications .
NOTE:
Adjust the left and right rear toe separately.
CAUTION:
Refer to Fastener Caution
.