Fastener Tightening Specifications
WARNING: This page is about a different car, the 2010 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Lower Ball Joint to Knuckle Nut | ||
|
40 N.m | 30 lb ft |
|
Plus 120 Degrees | |
| Lower Control Arm to Cradle Bolt - Front (With Rear Wheel Drive) | 200 N.m | 148 lb ft |
| Lower Control Arm to Cradle Bolt - Rear (With Rear Wheel Drive) | 320 N.m | 236 lb ft |
| Lower Control Arm to Cradle Nut (With All Wheel Drive) | 135 N.m | 100 lb ft |
| Shock Absorber Nut | 25 N.m | 18 lb ft |
| Shock Module to Body Bolt | 112 N.m | 83 lb ft |
| Shock Module to Lower Control Arm Bolt (With Rear Wheel Drive) | 25 N.m | 18 lb ft |
| Shock Module to Shock Module Yoke Bolt (With All Wheel Drive) | 90 N.m | 66 lb ft |
| Shock Module Yoke to Lower Control Arm Bolt (With All Wheel Drive) | 180 N.m | 133 lb ft |
| Stabilizer Shaft Bracket Bolt (With All Wheel Drive) | 105 N.m | 78 lb ft |
| Stabilizer Shaft Bracket Bolt (With Rear Wheel Drive) | 65 N.m | 48 lb ft |
| Stabilizer Shaft Link Nut at the Lower Control Arm (With Rear Wheel Drive) | 125 N.m | 92 lb ft |
| Stabilizer Shaft Link Nut at the Stabilizer Shaft (With All Wheel Drive) | 125 N.m | 92 lb ft |
| Stabilizer Shaft Link Nut at the Steering Knuckle (With Rear Wheel Drive) | 125 N.m | 92 lb ft |
| Stabilizer Shaft Link Nut at the Stabilizer Shaft (With Rear Wheel Drive) | 100 N.m | 74 lb ft |
| Upper Control Arm Ball Joint Nut | 80 N.m | 59 lb ft |
| Upper Control Arm To Steering Knuckle Pinch Bolt | 60 N.m | 44 lb ft |
| Wheel Bearing/Hub to Knuckle Bolt | 135 N.m | 100 lb ft |