LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> G6 Base, 2.4 B >> Repair and Diagnosis >> External Pages >> Different car >> Section 1122 (Antilock Brake System With Traction Control System & Stability Control System) >> Diagnostic Information and Procedures >> DTC C0710 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2010 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, verify that DTCs U1826, U1827, or C0292 are not set.
  2. Perform the steering angle sensor calibration procedure. Refer to Steering Angle Sensor Centering .
  3. With a scan tool, clear the DTC.
  4. Operate the vehicle within the conditions for running the DTC. Verify the DTC does not reset.
    • If the DTC resets, replace the steering angle sensor.
scientia non olet · About LEMON Manuals