LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> G6 Base, 2.4 B >> Repair and Diagnosis >> External Pages >> Different car >> Section 1093 (Lighting System) >> Repair Instructions >> Headlamp Leveling Front Suspension Height Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Front Headlamp Leveling Sensor Electrical Connector
    GM802719Courtesy of GENERAL MOTORS CORP.
  1. Position and rotate the sensor (1) and the locking tab into the holes in the wheelhouse panel.
    2. Fig 2: View Of Ball & Socket
    GM802716Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  2. Secure the clinch nut (2) on the stud to the wheelhouse panel and tighten to 9 N.m (80 lb in).
  3. Lock the ball socket (1) to upper control arm ball stud.
    4. Fig 3: View Of Front Headlamp Leveling Sensor Electrical Connector
    GM802719Courtesy of GENERAL MOTORS CORP.
  4. Connect the electrical connector (1) to the sensor assembly.
  5. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  6. Lower the vehicle.
  7. Set up and program the headlamp control module. Refer to Control Module References .
scientia non olet · About LEMON Manuals