LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> G6 Base, 2.4 B >> Repair and Diagnosis >> Brakes >> Anti-Lock Brake System, Traction Control System & Stability Control System >> Repair Instructions >> Brake Pressure Modulator Valve Bracket Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of BPMV & Bracket Assembly
    GM1961235Courtesy of GENERAL MOTORS CORP.
  1. Turn the ignition switch to the OFF position.
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  3. Remove the left front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  4. Remove the brake pressure modulator valve (BPMV) bracket nuts (1).
    5. Fig 2: BPMV Bolt
    GM1961238Courtesy of GENERAL MOTORS CORP.
  5. Carefully position aside the BPMV and bracket assembly to access the BPMV bolt.

    Support the BPMV assembly with heavy mechanics wire or equivalent.

  6. Remove the BPMV bolt (1).
    7. Fig 3: View Of BPMV & Bracket
    GM1961262Courtesy of GENERAL MOTORS CORP.
  7. Remove the bracket (1) from the BPMV.
scientia non olet · About LEMON Manuals