Transmission Fluid Checking
- Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
- Remove the transaxle oil level/filler plug (1) from the transaxle.
- Inspect the transaxle oil level.
Ensure that the oil level is even with the bottom of the transaxle oil level/filler plug hole.
- If the oil level is low, adjust the oil level accordingly by adding API GL-4 or GL-5 SAE 75W-90 or the equivalent.
- Install the transaxle oil level/filler plug into the transaxle.
Tighten: Tighten the transaxle oil level/filler plug to 39 N.m (29 lb ft).
- Lower the vehicle.
NOTE:
Refer to Fastener Notice
.