LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2007 >> Vibe Standard >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Repair Instructions >> Child Restraint Tether Anchor Replacement (Upper) >> Installation Procedure

Installation Procedure

    Fig 1: Child Seat Anchor Bracket, Rear Access Panel, Tether Anchor Covers And Bolts
    GM831275Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Install the child seat anchor bracket (4) to the vehicle. Secure the bracket with the bolt (3).

    Tighten:  Tighten the child seat anchor bracket bolt to 20 N.m (15 lb ft).

  2. Install the rear access panel (2).
scientia non olet · About LEMON Manuals